A collection of -----------is called a micro program.
Microinstructions.
____is the time needed by the CPU to recognize (not service) an interrupt request
Interrupt Latency
________ controls the sequence of the flow of microinstructions.
Micro program controller
Which one of the following is NOT a technique used when the CPU wants to exchange data with a peripheral device?
Virtual Memory
Identify the following type of serial communication error condition: “The prior character that was received was not still read by the CPU and is over written by a new received character.”
Overrun error
In which one of the following methods, does the CPU poll to identify the interrupting module and branches to an interrupt service routine on detecting an interrupt?
Software Poll.
An interface that can be used to connect the microcomputer bus to ________is called an I/O Port.
Peripheral devices.
In ________, a separate address space of the CPU is reserved for I/O operations.
Isolated I/O
In which one of the following methods for resolving the priority, the device with the highest priority is placed in the first position, followed by lower-priority devices up to the device with the lowest priority, which is placed last in the series?
Parallel
_________ is a technique in which some of the CPU’s address lines forming an input to the address decoder are ignored.
Partial decoding
An interface that can be used to connect the microcomputer bus to ________is called an I/O Port.
Peripheral devices.
______ is an electrical pathway through which the processor communicates with the internal and external devices attached to the computer.
Computer Bus
Identify the type of serial communication error condition in which A 0 is received instead of a stop bit (which is always a 1)?
Framing error
How can you define an interrupt?
A process where an external device can get the attention of the microprocessor
In which one of the following methods for resolving the priority, the device with the highest priority is placed in the first position, followed by lower-priority devices up to the device with the lowest priority, which is placed last in the series?
Parallel
In which one of the following methods, does the CPU poll to identify the interrupting module and branches to an interrupt service routine on detecting an interrupt?
Software Poll.
________ controls the sequence of the flow of microinstructions.
Micro program controller
Identify the following type of serial communication error condition: “The prior character that was received was not still read by the CPU and is over written by a new received character.”
Overrun error
In which one of the following methods, does the CPU poll to identify the interrupting module and branches to an interrupt service routine on detecting an interrupt
Software Poll
___ is the time needed by the CPU to recognize (not service) an interrupt request.
Interrupt Latency
The ___ is w-bit wide and contains a data word, directly connected to the data bus which is b-bit wide memory address register (MAR).
memory buffer register (MBR)
_________ is a technique in which some of the CPU’s address lines forming an input to the address decoder are ignored.
Microprogramming
Instruction pre-fetching
Pipelining
Partial Decoding
An Interface that can be used to connect the microcomputer bus to ______________ is called an I/O port
Flip flops
Memory
Peripherals devices
Multiplexes
Connection to a CPU that provides a data path between the CPU and external devices, such as a keyboard, display, or reader is called-----------
Buffer
I/O port
Memory mapping
Processor
In which one of the following methods for resolving the priority, the device with the highest priority is placed in the first position, followed by lower-priority devices up to the device with the lowest priority which is placed last in the series?
Asynchronous
Daisy-Chaining Priority
Parallel
Semi-synchronous
Identify the type of serial communication error condition in which A 0 is received instead of a stop bit (which is always a 1)?
Framing error
Parity error
Overrun error
Under-run error
Where does the processor store the address of the first instruction of the ISR?
Interrupt vector
Interrupt request
Interrupt handler
All of the given Options
Identify the following type of serial communication error condition: “The prior character that was received was not still read by the CPU and is over written by a new received character.”
Framing error
Parity error
Overrun error
Under-Run error
In ____________ a separate address space of the CPU is reserved for I/O operations
Isolated I/O
Memory Mapped I/O
All of the above
None of above
Every time you press a key, an interrupts is generated. This is an example of
Hardware Interrupt
Software Interrupt
All of the given
None of the given
_________ is an electrical pathway through which the processor communication with the internal and external devices attached to the computer.
Computer Bus
Hazard
Memory
Disk
Where does the processor store the address of the first instruction of the ISR?
Select correct option:
Interrupt vector
Interrupt request
Interrupt handler
All of the given options
In ________, a separate address space of the CPU is reserved for I/O operations.
Select correct option:
Isolated I/O
Memory Mapped I/O
All of above
None of above
-------------- is the time needed by the CPU to recognize (not service) an interrupt request.
Select correct option:
Interrupt Latency
Response Deadline
Timer delay
Throughput
Question # 4
_________ is a technique in which some of the CPU’s address lines forming an input to the address decoder are ignored.
Select correct option:
Microprogramming
Instruction pre-fetching
Pipelining
Partial decoding
Question # 5
How can you define an interrupt?
Select correct option:
A process where an external device can speedup the working of the microprocessor
A process where memory can speed up programs execution speed
A process where an external device can get the attention of the microprocessor
A process where input devices can takeover the working of the microprocessor
Question # 6
An interface that can be used to connect the microcomputer bus to ________is called an I/O Port.
Select correct option:
Flip Flops
Memory
Peripheral devices
Multiplexers
Question # 7
Every time you press a key, an interrupt is generated. This is an example of
Select correct option:
Hardware interrupt
Software interrupt
All of the given
None of the given
Question # 8
Identify the following type of serial communication error condition: “The prior character that was received was not still read by the CPU and is over written by a new received character.”
Select correct option:
Framing error
Parity error
Overrun error
Under-run error
Question # 9
A software routine performed when an interrupt is received by the computer is called as ---------
Select correct option:
Interrupt
Interrupt handler
Exception
Trap
Which one of the following methods for resolving the priority makes use of individual bits of a priority encoder?
Select correct option:
Daisy-Chaining Priority
Asynchronous Priority
Parallel Priority
Semi-synchronous Priority
In which one of the following methods for resolving the priority, the device with the highest priority is placed in the first position, followed by lower-priority devices up to the device with the lowest priority, which is placed last in the series?
Select correct option:
Asynchronous
Daisy-Chaining Priority
Parallel
Semi-synchronous
In ________, a separate address space of the CPU is reserved for I/O operations.
Select correct option:
Isolated I/O
Memory Mapped I/O
All of above
None of above
Identify the following type of serial communication error condition: “The prior character that was received was not still read by the CPU and is over written by a new received character.”
Select correct option:
Framing error
Parity error
Overrun error
Under-run error
Identify the following type of serial communication error condition in which no character is available at the beginning of an interval.
Select correct option:
Framing error
Parity error
Overrun error
Under-run error
Which one of the following methods for resolving the priority makes use of individual bits of a priority encoder?
Select correct option:
Daisy-Chaining Priority
Asynchronous Priority
Parallel Priority
Semi-synchronous Priority
A software routine performed when an interrupt is received by the computer is called as ---------
Select correct option:
Interrupt
Interrupt handler
Exception
Trap
_________ is a technique in which some of the CPU’s address lines forming an input to the address decoder are ignored.
Select correct option:
Microprogramming
Instruction pre-fetching
Pipelining
Partial decoding
Identify the type of serial communication error condition in which A 0 is received instead of a stop bit (which is always a 1)?
Select correct option:
Framing error
Parity error
Overrun error
Under-run error
Where does the processor store the address of the first instruction of the ISR?
Select correct option:
Interrupt vector
Interrupt request
Interrupt handler
All of the given options
Which one of the following is NOT a technique used when the CPU wants to exchange data with a peripheral device?
Select correct option:
Direct Memory Access (DMA)
Interrupt driven I/O
Programmed I/O
Virtual Memory
A software routine performed when an interrupt is received by the computer is called as ---------
InterruptC
Interrupt handler
Exception
Trap
Which one of the following methods for resolving the priority makes use of individual bits of a priority encoder?
Daisy-Chaining Priority
Asynchronous Priority
Parallel Priority
Semi-synchronous Priority
-------------- is the time needed by the CPU to recognize (not service) an interrupt request.
Interrupt Latency
Response Deadline
Timer delay
Throughput
______ is an electrical pathway through which the processor communicates with the internal and external devices attached to the computer.
Computer Bus
Thanks everone